ILX LIGHTWAVE LDC-3916558 CALIBRATION and ILX LIGHTWAVE LDC-3916558 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE LDC-3916558 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another TEC Temperature Controller?
Shop for Comparable Products on our  used TEC Temperature Controller page

 
   ILX LIGHTWAVE LDC-3916558 (3916558)   Description / Specification:    
ILX LIGHTWAVE LDC-3916558 24W, 3A TEC Temperature Control Module

The ILX Lightwave LDC-3916558 TEC Module provides up to 24W with 3A for TEC temperature control for use in the LDC- 3926 Modular Laser Diode Controller. High compliance voltage assures performance over long cable runs. This module has the highest power available for high density controllers. In addition all TEC control modules for the LDC-3926 include voltage measurement capabilities and internal thermistor current selection via front panel or remotely for control over a wide temperature range.
Specifications.

Temperature Control.
Range: -99.9°C to 150°C.
Thermistor Setpoint;
   -20°C to 20°C: 0.1°C (Resolution), ±0.2°C (Accuracy).
   20°C to 50°C: 0.2°C (Resolution), ±0.2°C (Accuracy).
Short-Term Stability (one-hour): <±0.007°C.
Long-Term Stability (24-hours): <±0.01°C.
Compliance Voltage: >8V DC.
Short Circuit Output Current: 3.0A.
Maximum Output Power: 24 W.
Current Noise and Ripple: <2mA rms.

Temperature Sensor.
Types: Thermistor (2-wire NTC).
Thermistor Sensing Current: 10μA/100μA.
Usable Thermistor Range: 25-450,000Ω, typical.



 

Standard Calibration $115.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE LDC-3916558. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your ILX LIGHTWAVE LDC-3916558 CALIBRATION and/or ILX LIGHTWAVE LDC-3916558 24W, 3A TEC Temperature Control Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: